Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design a 12bit CMOS sigma-delta ADC?

Status
Not open for further replies.

staric

Member level 4
Member level 4
Joined
Sep 26, 2003
Messages
79
Helped
4
Reputation
8
Reaction score
3
Trophy points
1,288
Activity points
661
cmos sigma-delta adc

The frequency is 200kHz. Where can find a detail circuit for me to use?
 

12bit under 200k hz if the technology is good enough, even 2 or 3 stage sigle bit is enough
 
you mean the input frequency or the sampling frequency, be careful about this, this is related to OSR.

you can use the general design methodology about sigma delta modulator. if it is the input frequency, I think 2 stages - single bit one may be a good choice.
 

i have done a 12bit sigma-delta ADC, i use 2 order

modulator. i think it's enough. maybe you can see

ALLen's book and use matlab make model.

Added after 1 minutes:

And i want to know what's mean 200kHz

the signal frequency or sample frequency?
 

for 2 order single bit modulator, must we add dither?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top