Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to communicate between PIC and PC by RF?

Status
Not open for further replies.

somwang

Newbie level 1
Joined
Apr 12, 2003
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
How to communicate between PIC and PC by RF?
 

Aurel

There are modules (receiver and transmiter) from AUREL working at about 430MHz and are suitable for about 50m. If you need bigger distance, i can search for you but let me know.

At the side of PC you will need to convert RS232 signal to TTL signal before applying it to this module and vice versa. To do this, try an IC like Max232 from Maxim or something similar

C'ya
 

Hi abouras

if you have several diagram for to increase the power (band 430MHz
AM and FM) please give me a links
thank's
 

Hi somwang,

there exist single-chip solutions that do exactly what you want: you can
feed them a RS-232 signal, they send it over a radio-link (433MHz,
868MHz or 2.4GHz) and can also receive and demodulate such a signal.
Such a chip is e.g. TR1001 from RFM (look in google). Also nordic has
such chips.

Bye
 

Hi there,

There is an instant solution microchip has published..rfPic Please check their website you can see rfPic12c509.
www.microchip.com

Analyzer.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top