How to change the SG3524 duty cicle to 0-50% ?

[LU_CS]

Hi, i would like to know how could i change the duty cicle of the SG3524 from 50%-100% to 0%-50%. Because just changing the resistor's value i can not go under 50% of duty cicle.
Thanks :-D

 

[FvM]

I guess you are misunderstanding SG3524 output polarity. Pulse width of a single output is 0..slightly below 50%, respectively 0..nearly 100% when paralleling both outputs. Re-read the datasheet.