traus
Newbie level 4
Hi,
i have some problems regarding PIC24FJ32GB002 programming (and debug) with ICD2. I've used Mplab 8.63 and this schematic
**broken link removed**
During programming, this pic is recognized: but a fail-salf test appears. These are obtained values:
Target Vdd High
Module Vpp High
MCLR Gnd Pass
MCLD Vdd High
MCLR Vpp High
In Settings->Power i have these voltages:
Target Vdd 3.75
Target Vpp 3.43
MPLAB ICD2 Vpp 12.94
What's wrong?
thanks in advance
i have some problems regarding PIC24FJ32GB002 programming (and debug) with ICD2. I've used Mplab 8.63 and this schematic
**broken link removed**
During programming, this pic is recognized: but a fail-salf test appears. These are obtained values:
Target Vdd High
Module Vpp High
MCLR Gnd Pass
MCLD Vdd High
MCLR Vpp High
In Settings->Power i have these voltages:
Target Vdd 3.75
Target Vpp 3.43
MPLAB ICD2 Vpp 12.94
What's wrong?
thanks in advance