Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Home developed PCI card doesn work (PC won boot up)

Status
Not open for further replies.
C

cyber_seth18

Newbie level 5
Joined
Feb 1, 2005
Messages
9
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Location
Philippines
Activity points
59
Need Help in PCI card

I have develop a PCi card using pci2040. however, when i plug the board to the slot, my pc won't boot up... what could be the problem.. PLs help...
 

Re: Need Help in PCI card

1.Check the schem of the card,compare it with the demo board.
2.Check the data in EEPROM for 2040.
 

Re: Need Help in PCI card

i havn't use EEPROm, i directly connect it to the slot and the HPI to the DSP. i found out that PCI 2040 is PCI 2.2 compliant and my board is only 2.1. Does it make any sense?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top