Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

High speed Delta Sigma ADC

Status
Not open for further replies.

currentmirror2000

Member level 4
Joined
Dec 21, 2004
Messages
77
Helped
6
Reputation
16
Reaction score
1
Trophy points
1,288
Activity points
798
Hello all,

Do you have any idea what's the highest sampling rate a delta sigma adc can achieve in today's state of art? 100MHz? 200MHz? 500MHz?

Thanks!
 

I see the 5 MHz in TI

but never see 100MHZ before
 

how about in research area?

in industry, TI has delta sigma modulator adc sampling up to 16MHz (typical is 10MHz); Analog Devices 64MHz

btw, is TI or Analog Devices the best analog & mix signal IC design company? or any other companies?
 

But in IEEE paper , there are some papers stated that the speed is more than 100MHz. Is that acheiveable or only experimental ?
 

I've heard of a Sigma Delta ADC with > 500Meg clock,
but it was continuous-time.
 

spanza said:
I've heard of a Sigma Delta ADC with > 500Meg clock,
but it was continuous-time.

i also found >1GHz, but it's BiCMOS process; any CMOS > a few hundrunds hz?
 

A switched capacitor DSM clocked at 200MHz was presented at the 2005 ISSCC.
And TI recently commercialised a 16b DSM sampled at 60MHz.
 
The highest I've seen was described in:

"A 2-GHz analog-to-digital delta-sigma modulator for CDMA receivers with 79-dB signal-to-noise ratio in 1.23-MHz bandwidth" (JSSC, November 2004

CT in 0.18u CMOS, 18mW power consumption at 1.8V.
 
what kind of applications does require such a high speed....I'm new to all this
 

currentmirror2000 said:
how about in research area?

in industry, TI has delta sigma modulator adc sampling up to 16MHz (typical is 10MHz); Analog Devices 64MHz

btw, is TI or Analog Devices the best analog & mix signal IC design company? or any other companies?

I can not find it in TI selection guide

could you tell me?
what is number in part?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top