Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help with DSK - multiplexed pins of expansion

Status
Not open for further replies.
O

omidsht

Member level 2
Joined
Dec 24, 2007
Messages
43
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,556
help with DSK

hi , i have written a program to use MCBSP to transmit a signal , but i dont see the signal on expansions connector pins , nut i can get the signal from the TMS IC pins from the backside of the DSK board , i read in the dsk manual that we should program the CPLD of the DSK to have the signals on the multiplexed pins of expansion . but i coudnt find how to do that .
can some body help me in this regard?
thanks in advance
omid sharifi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top