Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help with addition features to remote control

Status
Not open for further replies.

SOSXiuKang

Newbie level 1
Joined
Apr 16, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hello guys, im a student who is doing a final year project. I want to add additional features like a spraying button on a car remote control for an sprayer mount on the car. Is it possible and how?
 

Caveat: To experiment on the car's electronics is to risk ruining something expensive.

The remote control broadcasts a code when you press this or that button.

There is the slimmest possibility that the manufacturer put spare unused codes in the brain of the remote. If you could discover the right combination of buttons to press, and/or the right sequence of button presses, you might transmit a code to activate your project. (This is only speculation.)

In addition you would have to construct radio wave detection circuitry in the car, to decode your broadcast, and turn on the sprayer.

It is too much of a stretch to hope that you can get the existing detection circuitry (in the car) to respond to your broadcast code, and send a signal to your spray mechanism (if you can find a spare output line).
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top