bollsakkie
Newbie level 1
If I have an IC(through hole type) soldered onto a PCB, what is the minimum gap that I need to have between the PCB and the metal chassis (that the PCB is housed in) so that I can ensure that there is no "arcing" or discharge between the pin and the metal chassis?
Are there any standards relating to this?
Thanks in advance for your help!
https://obrazki.elektroda.pl/81_1178700715.jpg
Are there any standards relating to this?
Thanks in advance for your help!
https://obrazki.elektroda.pl/81_1178700715.jpg