Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

help about Synthesizer [hlp]

Status
Not open for further replies.

No one

Full Member level 5
Joined
May 11, 2005
Messages
287
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
3,425
Hello Everyone;
I have designed a frequency synthesizer, but it is not working well; sometimes it produces output and often not. A problem is in the PCB of synthesizer, the output line of it is not 50 ohm. May it be the reason of malfunctioning of synthesizer?
 

There could be thosands of reasons causing problems with your synthesizer. You do not say anything about the output frequency of the synthesizer, but intermittent failures caused by output mismatch seems unlikely.

You have to give us more information. Please post circuit diagram, layout , tech data etc.
 

what you mean by not working, it doesn't have outputat all?
or the output doesn't lock?
what is the frequency?

mehdi
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top