tarts
Member level 2
I have a dilemma wether I should allow the ground pour to go under inductor (see image) or not.
The inductor had a restrict area underneath it in Eagle, so currently there is no ground plane under it.
Why to allow: then the ground path for antenna microstrip would be uninterrupted
Why not to allow: Some currents flowing in that ground plane could induce noise into the inductor.
If there is somebody who has good experience in RF design would really appreciate an opinion.
The frequency of RF signal is 1575 MHz
The inductor had a restrict area underneath it in Eagle, so currently there is no ground plane under it.
Why to allow: then the ground path for antenna microstrip would be uninterrupted
Why not to allow: Some currents flowing in that ground plane could induce noise into the inductor.
If there is somebody who has good experience in RF design would really appreciate an opinion.
The frequency of RF signal is 1575 MHz