Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Finding the energy for the transmitted symbols shown below for the 16-QAM and 4-QAM techniques.

Status
Not open for further replies.
K

Keefe

Newbie level 5
Joined
Sep 7, 2022
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
69
MATLAB
Finding the energy for the transmitted symbols shown below for the 16-QAM and 4-QAM techniques. The values of each symbol in the complex plane are shown in the constellations shown below as attachments. I think the formula to solve for the energy of the transmitted symbol is
phpzLktfN

I can use assistance implementing this into Matlab for the 16-QAM and 4-QAM techniques. The problem statement is shown below in the attachments. Thank you in advance!
 

Attachments

  • z3a.PNG
    z3a.PNG
    98.4 KB · Views: 59
  • z3b.PNG
    z3b.PNG
    35.3 KB · Views: 57
  • z3c.PNG
    z3c.PNG
    80.6 KB · Views: 58

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top