Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Dual Mode Coupler Waveguide

Status
Not open for further replies.
M

markito86

Newbie level 6
Joined
Mar 23, 2011
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,375
Hi everyone, i will need to design a 4-port waveguide coupler for square waveguide and the center frequency in 19GHz.

Each kind of dimensions for the 2 square waveguides, holes or other are good.

In addition, the waveguide should be parallel in order to connect other downstream levels

To start, it can be good also a 3dB coupler for both E- and H-plane modes.

Can you help me?

Thank you in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top