Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Do the cell libraries used for synthesis contain comparators

Status
Not open for further replies.

lordsathish

Full Member level 5
Joined
Feb 11, 2006
Messages
246
Helped
33
Reputation
66
Reaction score
3
Trophy points
1,298
Location
Asia
Activity points
2,698
std cell hdl view

hi everyone...
Do the cell libraries that we use during synthesis contain standard cells for comparators....? i.e when we use comparison operators like <>= in the HDL , will they be replaced by compartor standard cells during synthesis...?

Is it better to design comparator using logic gates or to use the <>= symbols to realise the operations, considering the delay of the module...

Thanks...
 

Re: Comparator standard cell

Syhthesis will use designware components to replace hdl code.
if standard cell dont have this comparator, DC tool will transfer corresponding standardcell to replace designware components in optimal situation
 

    V

    Points: 2
    Helpful Answer Positive Rating
Comparator standard cell

Just use the <>= symbols.
You will waste a lot of time doing your own comparator which will almost certainly be worse than your synthesizer
 

Comparator standard cell

Hi

Usually in std cell libraries u dont find comparators, multipliers, carrylookadder etc,
if u r using design complier, then synopsys will provide these components with the dc tool, interms of designware components.

Regards
Mohi
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top