Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Development board with pic16f690 did not working properly

Status
Not open for further replies.
J

jejaka konfius

Newbie level 1
Joined
Jan 30, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
penang
Activity points
1,288
Development board with pic16f690 did not working properly..I have checked pic16f690 and it seems nothing wrong with it..the problem is when i run the program the interface could not be done within the board..I have checked the cable that connect from my pc to the board..it seems ok..but the problem is why this error occur time n time again...i hope someone can give the best solution to over come this error..Below are the error that appear everytime i try to interface program with the board.

ICD0021: Unable to connect with MPLAB ICD2(COM1)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top