Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Design Of Microstrip Antenna..

Status
Not open for further replies.

sreenivas003

Member level 1
Member level 1
Joined
Feb 24, 2007
Messages
34
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,442
i am designing microstrip antenna for bluetooth........can any one provide me some help...freg is 2.4ghz,substrate duroid having dielectric constant 2.32 and thickness of substrate is 0.127
 

you can use from software zeland(ie3d) for simulink microstrip antenna.
that software is very good in microstrip antenna. this software is method fullwave in electromagnetic.
you can refer to www.zeland.com for download zeland v12
 

try Microwave office from AWR
 

Try CST. HFSS costs alot of time, and the result is the same as CST
Other while CST is very easy to use

Added after 4 minutes:

With this low Frequwency , why do not you use the FR4. It is very cheap compare to Duroid.

Further more you can use the other company's subtrate like Neltec SA France . You can get the same material with duroid but the price is only a hafl.
 

IE3D,HFSS or anyother standard software u can use. but in paralle keep some standard ref books for microstrip antenna design.
one good book is by bahl and bhartia--- for microstrip antenna design
 

There is a very similar example in Ansoft - hfss_V10_book
 

try MIcrowave office, good for microstrip simulation but need high memory capacity
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top