Ferdy88
Junior Member level 1
- Joined
- Dec 26, 2010
- Messages
- 16
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Roma, Italy
- Activity points
- 1,402
Hello,
I have to design a LIMITER for a design of Envelope Elimination Restoration.
In a first moment, I seached to use the PIN diodes but I belive that they aren't suitable. I must make a limiter that has 28 dBm of output power on
R(load)=50 Ohm. I read several papers about EER but nobody say how to make this limiter. My frequency is 2.14 GHz and I use ADS.
I found only this article about the LIMITER:
An IC for Linearizing RF Power
Amplifiers Using Envelope
Elimination and Restoration
I hope that someone can help me to project this limiter. I have little time, this is a part of my thesis for 3° year.
I have to design a LIMITER for a design of Envelope Elimination Restoration.
In a first moment, I seached to use the PIN diodes but I belive that they aren't suitable. I must make a limiter that has 28 dBm of output power on
R(load)=50 Ohm. I read several papers about EER but nobody say how to make this limiter. My frequency is 2.14 GHz and I use ADS.
I found only this article about the LIMITER:
An IC for Linearizing RF Power
Amplifiers Using Envelope
Elimination and Restoration
I hope that someone can help me to project this limiter. I have little time, this is a part of my thesis for 3° year.