Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

complex FIR filter and SSB signal

Status
Not open for further replies.

mahyar

Newbie level 6
Newbie level 6
Joined
Sep 11, 2005
Messages
14
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,377
Dear friends,

As a part of my thesis which is to design a bandpass sampling receiver I have two basic questions to ask:
1- How to express and show a single sideband bandpass signal in MATLAB.
2- I have the transfer function of a complex FIR filter and the coefficients but I don't know how to express it in MATLAB and see its response to my single sideband signal.

Thanks,
Mahyar
 

I am not quite understand your situation, if your received signal is a DSB signal, you can apply a bandpass filter to get a SSB signal.

For the second, you can either use a Hilbert Transform to get a anylitical signal, I, Q, apply each path with your complex FIR filter.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top