Eligineer
Newbie level 3
Hi
I am new to FPGA's. (I just graduated and am a little lost)
Would be great if someone could give me a boost.
I am trying to compile Altera library files for a Stratix transciever IP in transcript section of Questa simulator and i received the following error when running the following command:
The CMD that I ran:
The error I received:
If this is so, why did Altera write it in the first place? Secondly, I tried commenting the module that is being claimed to problematic, and this did not solve the issue....What SHOULD I do?
Thank you so much in advance!
I am new to FPGA's. (I just graduated and am a little lost)
Would be great if someone could give me a boost.
I am trying to compile Altera library files for a Stratix transciever IP in transcript section of Questa simulator and i received the following error when running the following command:
The CMD that I ran:
Code:
vcom "$QUARTUS_INSTALL_DIR/eda/sim_lib/stratixv_atoms.vhd" -work work
The error I received:
I checked and saw that "stratixv_dffe" was already compiled prior to the file "stratixv_atoms.vhd" (there is a whole folder in path altera\14.0\modelsim_ae\altera\vhdl\stratixv\stratixv_dffe with .dat,.dbs,.psm and .prw files which i believed is accessed through a using command somewhere in a prior file compile) and that "stratixv_atoms.vhd" has a module that called "stratixv_dffe" inside of it. It seems to me that the module is the "unprotected design unit" that cant be added."# -- Compiling entity stratixv_dffe
# ** Error: C:/altera/14.0/quartus/eda/sim_lib/stratixv_atoms.vhd(1100): Can't recompile existing protected design unit "stratixv_dffe" as unprotected."
If this is so, why did Altera write it in the first place? Secondly, I tried commenting the module that is being claimed to problematic, and this did not solve the issue....What SHOULD I do?
Thank you so much in advance!