Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can the MOS gate be directly connected to VDD or GND?

Status
Not open for further replies.
safwatonline

safwatonline

Advanced Member level 4
Joined
Nov 19, 2005
Messages
1,341
Helped
219
Reputation
438
Reaction score
48
Trophy points
1,328
Location
EGYPT
Activity points
9,038
Ties

can the MOS gate be directly connected to VDD or GND , or does it will have relibility issues?
 

Ties

Sure, you can do it. But be very careful about the gates that are directly connected to the pins. These gates are very susceptible to damage because even a little of overvoltage can easily damage the gate oxide. so put an on-chip resistor in series of the gates which are connected to the pins.

OpAmp
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top