Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can 2 UDP connections work simultaneously with Siemens MC35i

Status
Not open for further replies.
W

wanchope

Member level 4
Joined
Mar 4, 2005
Messages
72
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,972
2 UDP connections

Hi, all,
Have anyone tried getting 2 UDP connections working simutaneouly with Siemens MC35i? One of my customers wants my controller to open 2 connections with different ports to cater for TX and RX respectively. IS it doable?
Please advice.

Wanchope
 

Re: 2 UDP connections

Yes, you can.

Since MC35i is only a means for the communication, what you need is to establish two socket on your microcontroller....

The only limitation is the communication speed, which will be shared, and also the resource on your microcontroller, as each socket may spend some resource...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top