kadikaram
Junior Member level 3
Hi,
Generally Efficiency = (Pout/Pin)*100, here i give the input power using port (-20dbm = its equal to 0.01mw power ). So i know the input power, and output power calculated using P= V*I formula. If in this method i calculated the efficiency become too low.. I would like to know, whether this method is right or wrong...?
Thanks.
Generally Efficiency = (Pout/Pin)*100, here i give the input power using port (-20dbm = its equal to 0.01mw power ). So i know the input power, and output power calculated using P= V*I formula. If in this method i calculated the efficiency become too low.. I would like to know, whether this method is right or wrong...?
Thanks.