Cadence 6.1.3 netlisting error

[streamc]

osshnl

I try to run simulate in scheme of MUX

**broken link removed**

**broken link removed**

I have run ADE L
When I try to netlist this message appears

Begin Incremental Netlisting May 22 09:53:47 2009
ERROR (OSSHNL-116): Unable to descend into any of the views defined in the view list, 'spectre cmos_sch cmos.sch schematic veriloga', for the
instance 'V2' in cell 'Elem'. Either add one of these views to the library 'analogLib',
cell 'vam' or modify the view list to contain an existing view.

End netlisting May 22 09:53:47 2009
ERROR (OSSHNL): Error(s) found during netlisting. The netlist may be corrupt
or may not be produced at all.
To generate correct netlist, fix the errors and re-netlist.
...unsuccessful.

How can I fix this errors?

And another problem:

when I try to add an instance nothing appears.

**broken link removed**

How fix it?

 

[oermens]

error found during netlisting

if your instances dont have views associated with them then it probably wont simulate. you're trying to add instance but there is nothing in the 'view' field.

 

[streamc]

osshnl netlisting

if your instances dont have views associated with them then it probably wont simulate. you're trying to add instance but there is nothing in the 'view' field.

Thanks, I solve problem with Instances.

But another question is still alive

 

[streamc]

error(s) found during netlisting

Question is still alive

 

[pvvikas]

cadence the netlisting maybe corrupt

@streamc
Could you solve the problem of OSSHNL? I too seem to be getting the same problem. I believe it is more of a .simrc issue. Please let me know.

Regards
vikas

 

[streamc]

error(s) found during netlisting cadence

pvvikas

@streamc
Could you solve the problem of OSSHNL? I too seem to be getting the same problem. I believe it is more of a .simrc issue. Please let me know.

Regards
vikas

Are you fix netlist?

You may try to write in view field words such "schematic", "symbol", etc.
It depends on type of the editor.

 

[Teddy]

error (osshnl): error(s) found during netlisting

I believe you did not specify list of avaliable views for netlister. Or you set a stop view incorrectly.