Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

C@dence Spectre RF question,when design WLAN I-Q Modulator!

Status
Not open for further replies.
H

hawsona

Junior Member level 1
Joined
Jan 22, 2002
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
192
tt_authfile_entry_missing

My simulation is often quit out, have no warning...especially when I do PSS simulation...

Is anybody often using SPECRE RF to design RF circuit?

My MSN: carmine_rene@hotmail.com

welcome to contact me!
:)
 

syslog: libtt

if you are running the simulation on a computer with quota set, you might be exceeding your quota.
 

problems spectrerf

I think it is not the problem of quota set since when I log into the workstation there is no warning about quota set.

I change workstation and simulate again. Same error occur.
Now I get the error log of workstation as following:

Jun 27 12:43:09 shhp3 syslog: libtt[21399]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21400]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21402]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21404]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 13:50:14 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 27 13:50:14 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 08:51:24 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 08:51:24 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 10:18:55 shhp3 syslog: libtt[21651]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 10:18:55 shhp3 syslog: libtt[21659]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:45:25 shhp3 syslog: libtt[21789]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:45:25 shhp3 syslog: libtt[22222]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:45:25 shhp3 syslog: libtt[21797]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:49:02 shhp3 syslog: libtt[26594]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:49:02 shhp3 syslog: libtt[26602]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:17 shhp3 syslog: libtt[26716]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:17 shhp3 syslog: libtt[26724]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:31 shhp3 syslog: libtt[26819]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:31 shhp3 syslog: libtt[26827]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:45 shhp3 syslog: libtt[26914]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:45 shhp3 syslog: libtt[26922]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:51:31 shhp3 syslog: libtt[26999]: clnt_create for rpc.ttdbserverd on s
hbkser failed: RPC: Program not registered
Jun 30 11:54:35 shhp3 : su : + 16 hfeng-sysfh
Jun 30 11:54:44 shhp3 : su : + 16 hfeng-cmren
Jun 30 11:51:31 shhp3 syslog: libtt[26999]: clnt_create for rpc.ttdbserverd on s
hbkser failed: RPC: Program not registered
Jun 30 12:00:07 shhp3 above message repeats 3 times
Jun 30 12:00:07 shhp3 syslog: libtt[27465]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 12:00:07 shhp3 syslog: libtt[27473]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
 

libtt tt_err_nomp

I think it is not the problem of quota set since when I log into the workstation there is no warning about quota set.

I change workstation and simulate again. Same error occur.
Now I get the error log of workstation as following:

Jun 27 12:43:09 shhp3 syslog: libtt[21399]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21400]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21402]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 12:43:09 shhp3 syslog: libtt[21404]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 27 13:50:14 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 27 13:50:14 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 08:51:24 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 08:51:24 shhp3 rpcbind: cannot accept connection: bad call sequence numb
er (current state 4)
Jun 30 10:18:55 shhp3 syslog: libtt[21651]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 10:18:55 shhp3 syslog: libtt[21659]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:45:25 shhp3 syslog: libtt[21789]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:45:25 shhp3 syslog: libtt[22222]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:45:25 shhp3 syslog: libtt[21797]: ttdt_Xt_input_handler(): tttk_messag
e_receive(): TT_ERR_NOMP^INo ttsession process is running, probably because tt_o
pen() has not been called yet. If this code is returned from tt_open() it means
ttsession could not be started, which generally means ToolTalk is not installed
on this system.
Jun 30 11:49:02 shhp3 syslog: libtt[26594]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:49:02 shhp3 syslog: libtt[26602]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:17 shhp3 syslog: libtt[26716]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:17 shhp3 syslog: libtt[26724]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:31 shhp3 syslog: libtt[26819]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:31 shhp3 syslog: libtt[26827]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:45 shhp3 syslog: libtt[26914]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:50:45 shhp3 syslog: libtt[26922]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 11:51:31 shhp3 syslog: libtt[26999]: clnt_create for rpc.ttdbserverd on s
hbkser failed: RPC: Program not registered
Jun 30 11:54:35 shhp3 : su : + 16 hfeng-sysfh
Jun 30 11:54:44 shhp3 : su : + 16 hfeng-cmren
Jun 30 11:51:31 shhp3 syslog: libtt[26999]: clnt_create for rpc.ttdbserverd on s
hbkser failed: RPC: Program not registered
Jun 30 12:00:07 shhp3 above message repeats 3 times
Jun 30 12:00:07 shhp3 syslog: libtt[27465]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
Jun 30 12:00:07 shhp3 syslog: libtt[27473]: _Tt_session::client_session_init():
TT_AUTHFILE_ENTRY_MISSING
 

wlan iq modulator

to check if the quota system is enabled, you can use "quota -v". From the logs you have posted, I understand that you might have problems with ToolTalk, but I believe it shouldn't affect you simulations, it should affect some small software like dtpad, but not spectre. I have a problem with ToolTalk on the workstation I am working, when I try to run dtpad from a remote terminal it gives an error for ToolTalk protocol, but I am able to run simulations without errors from the remote terminal.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top