Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

BF533 SPI booting from FPGA

Status
Not open for further replies.

ranganath_d

Junior Member level 3
Junior Member level 3
Joined
Apr 19, 2006
Messages
31
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Activity points
1,468
fpga spi

hai

iam designing hardware based on BF533 DSP processor along with STRATIX II FPGA. My design requirement is to SPIbooting of BF533 from FPGA. I dont know how to go further, if anybody knows SPIbooting with FPGA please kindly guide me....

Thanks in advance....
 

SPIbooting of BF533 from FPGA
If you mean, what you say, supplying the BF533 boot code from the FPGA, you can either use master (BMODE = 11) or slave (BMODE = 10) mode. The FPGA has to implement a SPI slave or master respectively, and should dispose of a configuration source. It's rather straightforward to my opinion.
 
thanks for ur response...

i want some reference schematic for SPI booting(either in slave or master mode) of BF533.
if any one has tried this what guidelines to be followed.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top