masood_ahm
Newbie level 5
what does Tipkalo and elko mean ... in the parts list "BOM.txt" file
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
masood_ahm said:what does Tipkalo and elko mean ... in the parts list "BOM.txt" file
masood_ahm said:(dont mind if this sounds a stupid question because i m new to this) ..
can you please tell me the size of your PCB because took print out of "PicKit2-1-mod.pdf" file in the "SCH_PCB_original" folder and it looks too small..
as Microchip have released the full documentation, if you want to use part of it to serve your cause may not be illegal.masood_ahm said:ok i know using original PICkit2 to program microcontrolors that doesnt belong to microchip.is illegal.. but this circuit is not the original PICKit2 ...using this for others should not be illegal .. so my question is ..by any chance ..can this programmer be used for AVR microcontrolors
you can use the DL4YHF programmer with external power supply and works well even for PIC18F2550codewiz said:The primary reason we come to such forum is to get help and help others. Thanks jhanus. i'll be building this programmer shortly. if i may ask, can i use jdm programmer with winpic for the 18f2550? it's functional and have used it to programme good number of pic chips except 18f2550.
a similar arrangement for 3.3V working has been shown by Bill in his Junebug assembly manual and also by Sizilva at www.mcuhobby.comx_dadu said:what about the "small additional board" for 3,3v pic's programming ! I need for dspic33 .
FDC6420 is available with Farnel with Order Code:1467968 and is not costly.divan said:Pickit2 PCAD and Gerber files
Original schematic with minor changes -
FDC6420C replaced by two separated MOSFETs.
All SMD components, diodes are SOT-23.
divan said:Pickit2 PCAD and Gerber files
Original schematic with minor changes -
FDC6420C replaced by two separated MOSFETs.
All SMD components, diodes are SOT-23.
may is ask that if i copy the schematic exactly as in pickit 2 and with memory then will this hex file run? in short this is unaltered hex file right? anyways good job.yes there are no 24LC512 EEPROMs, but who needs them, and it can't program 3.3V parts.