Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

adc spec in 10GbE ethernet

Status
Not open for further replies.

rampat

Member level 4
Member level 4
Joined
Jun 27, 2007
Messages
69
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Location
bangalore
Activity points
1,756
Hi all,
what is the kind of adc (specs) used in 10GbE ethernet chip.and how do you arrive at the specs for adc in 10GbE ethernet applications ?

thanks
rampat

Added after 38 minutes:

and another basic doubt,is there adc block in ethernet chip ?
-rampat
 

rampat said:
... is there adc block in ethernet chip ?
Wouldn't think so. It's a fully digital interconnection net.
 

It's a fully digital interconnection net
Depends on the media type. Popular 10GBASE-T is using an "analog" 16PAM modulation over the 4 pairs of a Cat 6 cable.
Of course it's using ADCs on the receiver side. See IEEE 802.3-2008_section4, clause 55 for the specification of the standard
and manufacturer information, e.g. from Broadcom for the implementation details.
 

Ok, didn't know that. Thank you!
 

typically the ADC will be 8-9bits running at 125Meg.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top