Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

4-ports differential S parameters to Z parameters

Status
Not open for further replies.

chromatik

Member level 4
Joined
Aug 15, 2006
Messages
78
Helped
2
Reputation
4
Reaction score
4
Trophy points
1,288
Location
Switzerland
Activity points
1,882
Dear all,

It is quite messy in my head !
I am trying to reconnect S-parameters to Z-parameters; for a 2 ports system, it is quite easy.
But for a 4 ports system, I must admit I am not so confident !

Do you have some ressources talking about this kind of task?

Thanks a lot for your help

Regards
 

Hi Baas Rietrot,

Unfortunately, this page's about 2-ports matrices...
 

N-port matrix conversions is discussed first, above 15.1 down to 15.9 (Loads of N by N matrix conversions). Then the 2-port transformations (N=2).
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top