armghan11
Member level 1
I am designing a buck converter having specifiaction
Input Voltage = 12v
Output = 5v
Output Current = 1.5A
I am using a IR2110/IR2112 as a gate driver. My proteus simulation is working perfectly but when i implemented it on breadboard the IR2110 didnt worked Need Help
I have attached the image of Proteus Simulation
Input Voltage = 12v
Output = 5v
Output Current = 1.5A
I am using a IR2110/IR2112 as a gate driver. My proteus simulation is working perfectly but when i implemented it on breadboard the IR2110 didnt worked Need Help
I have attached the image of Proteus Simulation