Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Problem with strcat()

Status
Not open for further replies.
O

Okada

Banned
Joined
Jun 16, 2016
Messages
1,159
Helped
129
Reputation
252
Reaction score
129
Trophy points
63
Activity points
0
Hi

I have Problem with strcat()

Find attached mikroC PRO PIC project and Proteus simulation file.

Press A button and it will show "Set frequency"

Frequency will be 100.00MHz

Now use B or C button to decrement or increment the value and then make again value 100 then it shows 100.0MHz instead of 100.00MHz.

Please tell me how to solve this problem. I have spent 2 hours finding a solution for it but it is not working. What ever method I use it prints 100.0MHz after first use.

It is my clients requirement that it display 100.00MHz that is two digits after decimal point.

I am using float2ascii.h which is provided by edaboard member paulfjujo.
 

Attachments

  • FM Transmitter.rar
    125.8 KB · Views: 43

@Easyrider83

There is no printf in mikroC PRO PIC but there is sprintf(). I tried it with your suggestion but not getting the required result. Should I use %.2f instead ?

Edit: Thank you Easyrider83

Your method worked with sprintf() and %.2f formatter.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top