Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
me also I am working with this IC IR21362 but nothing at the output,I propose you first to post your circuit configuratio so we can judge for help but myself for IR21362 I get nothing https://www.edaboard.com/threads/354240/#post1515384
I received the required output, I applied positive pull up resister & one decoupling capacitor 0.1uF disc capacitor to enable pin & get the required output.
AN0843 VFD is working, but
giving me 230V at 58Hz between M1 & M2, 139V 8Khz between M2 & M3, & 140V 8Khz between M3 & M1
Driver IC, IR21362 getting slightly heat & getting short at com pin & LO3 pin of IC, Can any body analyze & explain where might be the problem or can any body share their experience while working on AN0843 VFD.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
