Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Generator impedance affect the fault current

Status
Not open for further replies.

ss_engg

Member level 5
Joined
Mar 9, 2011
Messages
81
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
Pakistan
Activity points
1,854
My question is related to system Protection and it is:

"Generator impedance doe snot affect the fault current to a great extent in low-voltage distribution system. Explain?

I need the answer of this question. kindly help
 

You did not explain anything:
1) Is low voltage distribution system AC or DC and what is its current?
2) Protection from what?
3) What is the "fault current" and what causes it?
 

3) What is the "fault current" and what causes it?
I do not know if he is referring to this, but in a mono-phase transformer, the fault current is when the secondary windings are short circuited.
So I guess in his circuit, maybe if there is some short circuit problem.
 

It could be that the voltage regulator in the generator maintains the output voltage, so effectively removing part or all of the internal impedance of the generator.
Or it could be that the generator is part of a national grid while the fault current is on just one sub circuit connected to it.
Frank
 

Should define low-voltage distribution system. I guess it's meaned that the actual fault (=short circuit) current in public utility grid is mainly determined by transformer impedance, specifically x percent, to a lesser extent by the last mile(s) low voltage and mid voltage cables.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top