Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

P*otel DXP -> Design -> Update PCB Document

Status
Not open for further replies.
S

System.out

Member level 4
Joined
Jan 11, 2003
Messages
76
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
579
update pcb document

Hello !

I'm a new p*otel user and i have trouble transferring my schematic capture to pcb layout. I read in the manual that there should be an Update PCB Document command, but it's not there in this build, i guess.

So, what could i do ?

P.S.- I have tried under Tools -> Update From Libraries but doesn't pop up the pcb sheet.
 

Before you transfer your netlist to the PCB, you have to create a bare board with a board outline in the PCB editor and give it a name.

I suggest you read the training document that can be downloaded at:

**broken link removed**

What you are trying to do is described beginning on page 17.

If you don't have the menu command 'Design>Update PCB Document', there is something wrong with your software installation. I suggest you uninstall, and reinstall.
 

Yes this Update command doesn't exist in schematic until you create PCB document in project. After that you will see it.

Regards!
 

I saw it.
Thanks !

I think i do better with OrCAD.. :)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top