Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

regarding feedback in given opamp

Status
Not open for further replies.

shivamgarg

Newbie level 4
Joined
Oct 29, 2014
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
College Station, TX
Activity points
37
Hi folks...

I require help in interpreting the feedback network that is provided with the opamp. What does this feedback do?

FYI, the given opamp is amplifier with common mode feedback circuit.

Thanks.
 

Attachments

  • opamp.jpg
    opamp.jpg
    38 KB · Views: 83

It's a symmetrical bandpass amp,
  • lower bandpass frequency=1/(2π*15Cu*100k),
  • upper bandpass frequency=1/(2π*Cu*100k),
    (or 1/(2π*Cu*Rload), whichever is lower)
  • bandpass differential gain=15, low common gain
 

Isn't it a second order high pass
high pass freq1=1/(2π*Cu*100k)
high pass freq2 =1/(2π*Cu*Rload)
?

- - - Updated - - -

Plus additonal low pass with Tlp = Rsource*15Cu
 

Isn't it a second order high pass?

- - - Updated - - -

Plus additonal low pass with Tlp = Rsource*15Cu

Yes, of course. I just wanted to give a hint for the case Rsource ≪ 100kΩ .

... and then this
upper bandpass frequency=1/(2π*Cu*100k),
(or 1/(2π*Cu*Rload), whichever is lower)
... is nonsense, sorry!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top