Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Repair help for Hitachi V-212 scope

Status
Not open for further replies.
T

TexasTwister

Newbie level 2
Joined
Nov 8, 2014
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
15
Howdy,
I am new to this message board and recently purchased an Hitachi V-212 scope off eBay along with a curve tracer to fix arcade video boards I also purchased off eBay for my own personal use. Anyway it appears CH1 X input is not functioning as the adjustments knobs don't adjust but CH2 Y works okay so it is worthless with the curve tracer so I have downloaded the service manual but thought I would ask what is the best starting point before I open up the scope.

Thanks so much,

TexasTwister
 

You probably want to replace all power electrolytic caps as they will be near end of life and start with a visual inspection.
A capacitance meter that reads ESR would be helpful.

Then start debugging by comparing channel quiescent voltages.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top