Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with OCDemon flash detection

Status
Not open for further replies.
D

davorin

Advanced Member level 3
Joined
Jun 7, 2003
Messages
901
Helped
11
Reputation
22
Reaction score
4
Trophy points
1,298
Location
Switzerland
Activity points
7,349
OCDemon flash detection

Anybody had same problem with flash detection on OCDemon flash programmer for MPC8XX?

Always gives me byte-swapper device/manufacturer ID but readout of flash is correct though...also endiannes settings have no effects in flash detection...
 

Re: OCDemon flash detection

davorin said:
Anybody had same problem with flash detection on OCDemon flash programmer for MPC8XX?

Always gives me byte-swapper device/manufacturer ID but readout of flash is correct though...also endiannes settings have no effects in flash detection...
Click to expand...

It is Flashprog feature :)
For ARM and Big Endian (I do not test it in Low Endian mode) flashprogrammer also swaping bytes ....

As solution I swap it in Flash.ini file, for used Flash chip .....
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top