Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

What should I fix with : "Could not power up debug port: Control/Status register ?

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
What should I fix with : "Could not power up debug port: Control/Status register ?

Guys,

I got error on reading STM32 :
What should I fix ? thanks
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
* JLink Info: TotalIRLen = 9, IRPrint = 0x0011
**JLink Warning: Identified core does not match configuration. (Found: None, Configured: Cortex-M3)
**JLink Warning: CPU not halted after Reset, halting using Halt request
***JLink Error: Could not power up debug port: Control/Status register reads 000000F0
 

Re: What should I fix with : "Could not power up debug port: Control/Status register

is it because of the crystal clock not working ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top