Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

port refinement process hf3d : post does not have a solved inside material eitherside

Status
Not open for further replies.
S

srenga84

Newbie level 2
Joined
Jan 1, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,293
port refinement process hf3d : post does not have a solved inside material either side...

i design the 4 port coupler using substrate integrated technology method ....I have received error is mention above the line.. i kindly request help with me
 

Select your objects one by one and check the properties pane. There should be a tick box 'Solve Inside' which should be ticked in the regions where you want to solve.

(this is normally left checked, unless your object is PEC or other high conductivity material)
 
U may also encounter this error when the metal traces are not exactly touching the port. Ensure that the size of the rectangle u define to assign an excitation should be sufficient for touching the metal traces.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top