Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

SOT23 diode with Non connected pin.......what is it connectd to?

Status
Not open for further replies.
T

treez

Guest
Hello

I wish to connect the Anode and "N/C" pins of the BAT750 schottky diode with the same copper pour area for cooling purposes...is this ok?......or will i be shorting out the anode?.....the datasheet doesnt say whether the "N/C" pin is perhaps connected to either anode or cathode?

BAT750 Datasheet
**broken link removed**
 

Hello treez,

normaly you can do it. Take an Ohmmeter and test if N/C is connected inside to Anode or cathode. If not, it's no problem

Regards

Rainer
 
  • Like
Reactions: treez

    T

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top