Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with noise in LCA110 chip used in phone line

Status
Not open for further replies.
E

eric_yeow

Newbie level 1
Joined
Sep 27, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
Chip LCA110

Friends:

I am using LCA110 chip to connect phone line for realizing hook-off function in a system design. The hook-off circuit is included two transistors and few capacitors. One transistor’s emitter has been connected to the ground by 1UF poly capacitor. Pin2 of the LCA110 is set to logic 0 by 8051.
The wired thing is when Pin2 of the LCA110 is set to 0; few seconds later, the noise is coming out.
What are the possible reasons for it?
Thank you for your suggestions. 8O
 

Re: Chip LCA110

Maybe your microcontroller cannot supply the Input Control Current.
For LCA110 the control current (LED) can be between 2mA and 50mA
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top