Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Different type of Si Faults reported for SRAM's and their definition

Status
Not open for further replies.
S

sachinraik

Newbie level 2
Joined
Jun 29, 2011
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,292
Hi Group,

I would like to understand various Faults which can occur during a SRAM testing.
I understand that there are SAF, TRN , CF faults etc.
But I'm looking for an indepth description of these faults.

I tried googling but has not resulted in much returns.

Can somebody help me with this?

Regards,
Sachin
 

Conventional faults in RAM's are:
Stuck-At Fault (SAF)-Cell or line sticks at 0 or 1.
Transition Fault (TF)-Cell fails to transit from 0 to 1 or 1 to 0.
Stuck-Open Fault (SOF)-Cell not accessible due to broken line.
State Coupling Fault (CFst)-Coupled cell is forced to 0 or 1 if coupling cell is in given state.
Address-Decoder Fault (AF)-A functional fault in the address decoder
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top