Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Conformal Antenna Simulation on CST

Status
Not open for further replies.
V

varuniyengar

Advanced Member level 4
Joined
Jan 18, 2011
Messages
107
Helped
17
Reputation
34
Reaction score
17
Trophy points
1,298
Activity points
1,743
How to increase the thichness of the patch in a conformal antenna on CST
 

hi
what u mean???????
 

Wat i mean is i have already designed a conformal patch for 22GHz band but for improvement in the omni radiation pattern in azimuth and the two elevation i might have to increase the thickness of the conformal patch. How would i do it in CST Microwave Studio??
 

Hi,
A good advice is to get used to parametrize your structures. if not already parametrized (which is the case I guess) that would help if you post your project.
 
hi

you cant increase the patch thickness because to bend it it has to be sheet
 

sorry for my previous post, I missed your point.
To increase the thickness of a conformal antenna I would duplicate the sheet, then add an offset and at the end use the loft function to make a conformal solid. It is maybe worth to give it a try (I don't have access to MWS this week-end).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top