Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

need help about Power design.~~

Status
Not open for further replies.
W

wontall

Newbie level 6
Joined
May 4, 2004
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
82
i need high-precision Power with 3 ports out in 1A(+12.00v,-12.00v,+500v).
I have already designed +12.00v with high precision .
the next, i wanted to use dc-dc to change +12.00v to +5.00v and to
-12.00v. but the problem is that: when i do it like this way, the other two
out ports volage can not keep the high precision as the 12.00v does.

what can i do~~ :idea:
 

One DC-DC circuit can not generate two precise output voltage!
1st:use two dc-dc to do .
2nd:use one dc-dc circuit,then use a LDO to generate another output.
 

One DC-DC circuit can generate two output voltage,really is not preciouse enough. I think the reason of it maybe is that many DC-DC IC are be designed by switch-power, as we konw , The switch power can not generate preciouse voltage as the linar-power does.you know,many
inductance make precious volage impossible.
SO Can anyone can tell me which DC-DC IC can generate preciouse voltage.or CAN GIVE ME ANOTHER IDEA?

THANKS` :?: :idea:
 

switchmode power supply can generate precise voltage!!!
the difficult of precise voltage with dc-dc is ripple/noise and loop controling.
much inductor can reduce ripple,but I think you can use more useful idea to do it!
1st: using zero ripple of switchingmode power supply,suggesting cuk topo.
2st: increase frequency to reduce filter and reduce ripple.
3st: increase loop response speed.
and more......
 

alphi
you are so kind~~!!!!!!!!!!!!!!!!!!!!!!!!!! :wink:
i am a newbie from china,you know ,english is not my mother language
you suggest me that:"1st: using zero ripple of switchingmode power supply,suggesting cuk topo."
but i can understand "cuk topo". what is "cuk topo" i can not search it by google
 

Hi

He is reffering CUK topology, I have no good papers or URLs I am afraid but you can try here for more info. Or search for CUK topology.

hxxp://www.boostbuck.com/TheFourTopologies.html
hxxp://www.analogzone.com/col_0106.htm



Nt very much of information but i hope it helps a little.
/Cluricaun
 

you might also consider using current mode PWM controller IC as you can get a much faster response to transients. for example, unitrode 1844A or related families

Mr.Cool
 

you can use google to find it,many ic company have many cuk dc-dc chip for special application.that is best reference for you!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top