Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

1m sized antenna for radio transmitter at 3.5 - 4 Mhz frequency

Status
Not open for further replies.
F

froten

Member level 3
Joined
Jun 17, 2006
Messages
56
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,798
Hello all,

I'm trying to design a radio transmitter at frequency 3.5 to 4 Mhz.

The bigest problem is the Antenna design. At 4Mhz the half-wavelenght antenna will be 37.5 m, which is not acceptable at all due to space limits, even quarter-wavelenght is not acceptable.

what is the recommended antenna that has small size like 1m lenght or diameter that can be used.

Thanx in advance for any help.
 

Re: antenna design

You probably should go ask on a ham radio board. But if it were me, I would use a base loaded short whip antenna. The base loading would be a big airwound inductive coil.
 

Re: antenna design

hi,

i was told a long back that we can try monopole antenna (with a big Ground plate) with resonator loading to reduce the length of antenna around 30MHz.
 

Re: antenna design

hi,
may i know that u design for main antenna for the radio right?
 

Re: antenna design

froten said:
Hello all,
I'm trying to design a radio transmitter at frequency 3.5 to 4 Mhz.
The bigest problem is the Antenna design. At 4Mhz the half-wavelenght antenna will be 37.5 m, which is not acceptable at all due to space limits, even quarter-wavelenght is not acceptable.
what is the recommended antenna that has small size like 1m lenght or diameter that can be used.
Thanx in advance for any help.
Click to expand...

Ya cant break the laws of physics mate ;) if you want a working transmitting antenna for ~ 4MHz its gonna be big
even a base loaded whip is going to be several metres long !! its just the way it is live with it

You are never likely to get any antenna that is only 1m long to resonate at 4MHz, its going to be extremely inefficient

Dave
VK2TDN
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top