Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST antenna simulation problem

Status
Not open for further replies.
A

AmirMohammad

Member level 2
Joined
Apr 7, 2007
Messages
48
Helped
5
Reputation
10
Reaction score
3
Trophy points
1,288
Activity points
1,601
Dear all
While Simulating 3 antennae by CST which have three separated ports cst every time excites 1 port while the other ports are terminated. But to see the overall radiation pattern due to all antennae we need all ports be excited simultaneously. what can I do other than using a power divider?
 

In CST you have an option in "result" menu to combine results. After simulating your 3 port structure, go to "results --> combine results...". Here you can define excitation (both amp and phase) for different ports. After giving correct amp/phase, click "combine". Here you go; you have your results.

Good luck.

regards,
Shameem
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top