ogulcan123
Member level 5
- Joined
- Apr 23, 2011
- Messages
- 81
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Location
- Istanbul, Turkey
- Activity points
- 2,024
Hi all,
I'm using Mentor Graphics PADS VX.1.2 for PCB design in Windows 7 Pro OS.
I have a pad-plane connection issue. Some pads (not all) does not connect as if they are different nets although they are the same net.
Here is a problematic plane with its properties shown:
![plane_connect2-2.png plane_connect2-2.png](https://www.edaboard.com/data/attachments/72/72465-f0d07661fcf8c3623be8cae987d69c70.jpg)
When I do plane connect using Pour Manager:
![plane_connect3.PNG plane_connect3.PNG](https://www.edaboard.com/data/attachments/72/72461-a1b788b77fb36a51b11e6b72b8562128.jpg)
I get following errors(don't know how relevant):
![plane_connect4.PNG plane_connect4.PNG](https://www.edaboard.com/data/attachments/72/72460-c7bacf1819ced12c5ac24a7f9f7586cb.jpg)
Here is shown only the top layer (using "z1" modeless command):
![plane_connect5.PNG plane_connect5.PNG](https://www.edaboard.com/data/attachments/72/72459-e42f1578532142f65a5c5069008c3b04.jpg)
Here is the cam plane preview where the problem is better seen:
![plane_connect6.PNG plane_connect6.PNG](https://www.edaboard.com/data/attachments/72/72458-10c00053217997afd1ac218dcd49deca.jpg)
Here is my Split/Mixed Plane options:
![plane_connect7.PNG plane_connect7.PNG](https://www.edaboard.com/data/attachments/72/72462-c35b1698c5694bf10278f6418cb6516d.jpg)
Note: In all pictures, green is the explanation edits.
How can I fix this issue?
Any suggestions are welcomed.
I'm using Mentor Graphics PADS VX.1.2 for PCB design in Windows 7 Pro OS.
I have a pad-plane connection issue. Some pads (not all) does not connect as if they are different nets although they are the same net.
Here is a problematic plane with its properties shown:
![plane_connect2-2.png plane_connect2-2.png](https://www.edaboard.com/data/attachments/72/72465-f0d07661fcf8c3623be8cae987d69c70.jpg)
When I do plane connect using Pour Manager:
![plane_connect3.PNG plane_connect3.PNG](https://www.edaboard.com/data/attachments/72/72461-a1b788b77fb36a51b11e6b72b8562128.jpg)
I get following errors(don't know how relevant):
![plane_connect4.PNG plane_connect4.PNG](https://www.edaboard.com/data/attachments/72/72460-c7bacf1819ced12c5ac24a7f9f7586cb.jpg)
Here is shown only the top layer (using "z1" modeless command):
![plane_connect5.PNG plane_connect5.PNG](https://www.edaboard.com/data/attachments/72/72459-e42f1578532142f65a5c5069008c3b04.jpg)
Here is the cam plane preview where the problem is better seen:
![plane_connect6.PNG plane_connect6.PNG](https://www.edaboard.com/data/attachments/72/72458-10c00053217997afd1ac218dcd49deca.jpg)
Here is my Split/Mixed Plane options:
![plane_connect7.PNG plane_connect7.PNG](https://www.edaboard.com/data/attachments/72/72462-c35b1698c5694bf10278f6418cb6516d.jpg)
Note: In all pictures, green is the explanation edits.
How can I fix this issue?
Any suggestions are welcomed.
Last edited: