Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Problem with 74hc164 overheating when given 5V from 7805

Status
Not open for further replies.
M

mousepad

Junior Member level 1
Joined
Mar 5, 2008
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,382
74hc164 heat

Hi guys

I'm using 74hc164 to drive some LEDs . and PIC24FJ96GA010 to give clock pulse

My problem is
its smoothly working when I give power to 74hc164 through my pic development LV24-33(3.3V)

but if try to give 5V from 7805 and clock pulse from LV24-33(3.3V) it is getting heat :cry:




Can anybody have idea about this?

Help me please

Thanks
 

Re: 74hc164 heat

Please change the 150ohm resistor to 330ohm or more... 150 ohm at 5 volts gives about 30mA...LEDs are drawing current larger than their operating continous current.
 

    M

    mousepad

    Points: 2
    Helpful Answer Positive Rating
74hc164 heat

Use high ampere output 5V regulator i.e. 3A and always use heat sink with linear regulators

Added after 9 minutes:

And use resistor value accordingly
 

    M

    mousepad

    Points: 2
    Helpful Answer Positive Rating
Re: 74hc164 heat

150 ohm at 5 volts gives about 30mA
Click to expand...
Although 20 mA or less can be actually expected, considering the LED voltage drop and driver saturation voltage, you should also pay attention to this specification:
absolute maximum ratings
Continuous current through VCC or GND ±50 mA
Click to expand...
It requires a load resistor not smaller than e.g. 470 ohm when drivin 8 LEDs.
 

    M

    mousepad

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top