Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to measure output load of buffer by Hspice of cadence

Status
Not open for further replies.
X

xanhphysics

Junior Member level 1
Joined
Aug 17, 2007
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,407
I'm designning output buffer for LA with require output load =50 ohm
But after i design i dont know how to simulate to examine the value of output load by Cadence .Hope anyone can help me how to solve this problem .
Best regards,
 

s-param can provide imformation about output port impedance.
 
Re: How to measure output load of buffer by Hspice of cadenc

can you tell me more detail
 

By SP analysis, you will get the Z parameter information, in which, the Z22 is the output impedance of your circuit.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top