Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

A question about Expedition PCB(GLOSS OFF MODE).

Status
Not open for further replies.
S

sonicss

Member level 1
Joined
Sep 6, 2004
Messages
40
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Location
China
Activity points
314
Why the display if different of traces when I use gloss off mode.(see below picture)
 

Hi

whic tool ur using ?
it may be display refresh problem ?
 

Mentor WG2004 (Expedition PCB)
 

On Mentor Expedition ,you can decide to force trace to gloss OFF/Partial/ON (F4).
Gloss off means that the trace you are routing can't "move automatically"(means best route and length or push), but only manually move.
If you try to route over a gloss off trace, this trace don't move !!
So in this case a portion of that trace is closs off the other not.

mkbs
 

Can I change the option of the display mode of the trace?
 

sonicss said:
Can I change the option of the display mode of the trace?
Click to expand...
Yes, after you have all your traces done, in the routing mode, select all traces or just the trace you want to change, then select the "unfix" or "fix" button.
 

    S

    sonicss

    Points: 2
    Helpful Answer Positive Rating
Thank u, It's can be sloved by using "unfix" command
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top