Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Convert S parameter into TDR Impedance

Status
Not open for further replies.
M

mike_bihan

Full Member level 3
Joined
Mar 21, 2002
Messages
182
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,531
There is an equation in HFSS manual. However, there is a print error.
Could any one correct it and point out the reference source?

Z0*(1_re(S11)/(1-re(S11).

It seems not direct to me.

thanks,
 

You got the input impedance if you change _ by + but not the TDR impedance. The S-parameters being a frequency response, I dont think its should be correct but I cant help you any further, sorry.
David
 

Yep, just change the upper part of the formula, use + sign insetead of minus.
For more information look for the paper from Daniel Wu. There was a post recently about Ansoft presentations you can download from the web site.
I can't remember about the name of the post, but it was within last 2 weeks.
The paper was written for HFSS 8.5, but should not make any difference.
Hope this helps.:D
 

    M

    mike_bihan

    Points: 2
    Helpful Answer Positive Rating
It does not address the principle of the equation.

Also, I can not see the reason to get real part of S11.
 

They do not match exactly between TDRZ and above equation. It does not looks right.
 

    M

    mike_bihan

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top